hpc, hpd www.vishay.com vishay draloric revision: 11-sep-15 1 document number: 22167 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage disc capacitors, 20 kv dc screw mounting, class 2 ceramic material capacitor elements made from class 2 ceramic dielectric with noble metal electrodes. connection terminals: thread terminal, brass, silver plated allowable torque: 5.0 nm (44 lbf in) finish the capacitor body of the hpd type is completely protective lacquered. the hpc type feature a coating made from silicone elastomer to minimize the adverse effect of moisture, dust and other impurities in the working environment. marking capacitance value and tole rance, manufacturer logo. features ? high reliability ? wide range of capacitance values applications hpc and hpd high voltage capacitors made from class 2-ceramic dielectric can be used as coupling and bypass capacitors where low power ratings are required and larger capacitance changes with temperature can be tolerated. capacitance range 350 pf to 5.0 nf capacitance tolerance 20 % ceramic dielectric r2000h (z5u) rated voltage 20 kv dc or 15 kv rms (up to 120 hz) dielectric strength test 25 kv rms , 50 hz, 5 minutes dissipation factor max. 0.5 % (1 mhz) insulation resistance min. 50 000 m ? (at 25 c) operating temperature range -25 c to +85 c quick reference data desription value type hpc hpd ceramic class 2 ceramic dielectric r2000h voltage (v p ) 20 000 min. capacitance (pf) 350 max. capacitance (pf) 5000 mounting screw mounting
hpc, hpd www.vishay.com vishay draloric revision: 11-sep-15 2 document number: 22167 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) the type hpd must be operated in a high insulation environment, e.g. oil or inert gas. ? when operate this type in free air the rated voltage must be reduced to 7.0 kv dc . (2) to an max. ambient temperature +60 c sap part number, electrical and dimensional data part number ceramic capacitance values (pf) rated voltage (1) (kv dc ) rated voltage (1) (kv ac ) rated rf-current (2) (a rms ) d 1 mm (inch) d 2 max. mm (inch) type hpc hpc050wp35138ax1 r2000h (z5u) 350 20 (15 kv rms up to 120 hz) 6.0 max. 50 (1.97) hpc050wp50138ax1 500 hpc050wp75138ax1 750 hpc050wp10238ax1 1000 hpc060wp15238ax1 1500 60 (2.36) hpc060wp20238ax1 2000 hpc070wp30238ax1 3000 70 (2.76) hpc090wp50238ax1 5000 90 (3.45) type hpd hpd021wp35138ax1 r2000h (z5u) 350 20 (15 kv rms up to 120 hz) 6.0 max. 21 (0.83) HPD025WP50138AX1 500 25 (0.98) hpd030wp75138ax1 750 30 (1.18) hpd035wp10238ax1 1000 35 (1.38) hpd043wp15238ax1 1500 43 (1.69) hpd050wp20238ax1 2000 50 (1.97) hpd059wp30238ax1 3000 59 (2.32) hpd075wp50238ax1 5000 75 (2.95) dimensions in millimeters (inches) d1 1.5 ( 0.06) 38 2.0 (1.50 0.08) 17 1.5 (0.67 0.06) s w 10 (0.39 hex.) m6 thread 7.0 (0.28) depth both end s hpd hpc s w 10 (0.39 hex.) m6 thread 7.0 (0.28) depth both end s d2 max. 38 2.0 (1.50 0.08) 23 (0.91)
hpc, hpd www.vishay.com vishay draloric revision: 11-sep-15 3 document number: 22167 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting guidelines ? avoid installation in which too much torq ue is applied to the capacitor elements. sc rew torque limit must be 5.0 nm (44 lbf in.) ? do not use screws whose thread is lo nger than specified in the datasheet ? the capacitor elements must not be used as a mechanical support for other devices or components ceramic characteristics (typical) capacitance change vs. temperature dc voltage dependence of capacitance related documents general in formation www.vishay.com/doc?22071 -60 -50 -40 -30 -20 -10 0 10 20 30 0 102030405060708090 ? c/c (%) temperature ( c) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 0 1000 2000 3000 4000 ? c/c (%) applied field s trength (v/mm)
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
